Grommets / Filters - Page 2 - Huge Savings! Save up to 12%


Huge Savings! Up to 12% off on Grommets (in Filters) at Split Racing, Page 2 [84]. Top brands include AEM, K&N, Airaid, Spectre Performance, Baldwin, Wix, aFe Power, Mr. Gasket, & Trans-Dapt Performance. Hurry! Limited time offers. Offers valid only while supplies last.



AEM AEM-21-768C 21-768C Cold Air Intake System
By AEM
In Stock
$258.99

mpn: 21-768C, ean: 0024844360496,

4.2 out of 5 stars with 14 reviews
AEM21-768CIncreased horsepower. Tuned and dyno-tested to improve acceleration and engine sound. Low restriction aluminum tubing. Easy to install using commonly available tools. Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions).


K&N Universal Clamp-On Engine Air Filter: Washable and Reusable: Round Tapered; 4 in (102 mm) Flange ID; 9.5 in (241 mm) Height; 6.625 in (168 mm) Base; 5.25 in (133 mm) Top , RC-4780
By K&N
In Stock
$61.69
$61.59

mpn: RC-4780, ean: 0024844091369,

4.8 out of 5 stars with 59 reviews
K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16


Airaid 311-770 Direct Replacement Premium Dry Air Filter
By Airaid
In Stock
$203.91

mpn: 311-770, ean: 0642046347703,

4.5 out of 5 stars with 57 reviews
05-10 Jeep grand cherokee 5.7L hemi jr. Kit.Superior filtration; no oil filter. Increases performance and mileage. Washable and reusable. Hand-built using the finest materials. Lifetime no hassle warranty.


Spectre Performance 42872 ExtraFlow Red Breather
By Spectre Performance
In Stock
$19.99
$17.61
You Save: 12%

mpn: 42872, ean: 0089601428727,

4.5 out of 5 stars with 17 reviews
Spectre’s Extraflow Push-In Breathers are designed for valve covers with a 1-1/4 inch breather hole. These high performance chrome plated breathers have an overall height of 2-3/4 inch and feature a 2 inch tall open breather element that comes in black, white, red, and blue.Grommet is not included, use grommet kit P/N 5339. Fits a 1-1/4 inch breather hole. 2 inch tall breather element. 2-3/4 inch overall height.


K&N 62-1015 Vent Filters
By K&N
In Stock
$23.01

mpn: 62-1015, ean: 0024844014993,

4.1 out of 5 stars with 40 reviews
K&N Steel Base Crankcase Vent Filters have a one piece design with a rubber or chrome top and a vent tube added to the base. Filters can be pressed into rubber grommets in valve covers for direct mounting. All base plates are chrome plated. Tubes are made of zinc.Zinc tube base. Baseplates are chrome plated. Mounted directly into rubber grommets in valve covers. Washable and reusable.


Baldwin P40 Full-Flow Lube Element with Bail Handle
By Baldwin
In Stock
$9.06

mpn: P40, ean: 0791440000513,

4.7 out of 5 stars with 34 reviews
Replaces: Clark 604081; Hyster 60518-24; Massey Ferguson 1014219-M91. Fits: Clark, Galion, Hyster in Fram F3 Series Housings; Allis Chalmers, Bobcat, Case, Caterpillar, Fiat, Onan, Massey Ferguson Equipment.Fits a variety of brands including Clark, Galion, Hyster, Allis Chalmers, Bobcat, Case, and more. Replaces the Clark 604081. Measures 3 23/32 inches wide, 4 7/16 inches long, and 1/2 inches in depth. F. Gasket: G105, O. Gasket: G115-A, G402, Grommets: [2] Attached.


WIX Filters - 24800 Heavy Duty Air Filter Service Gauge, Pack of 1
By Wix
SKU: #WIX24800
In Stock
$39.51
$38.70
You Save: 2%

sku: WIX24800, mpn: 24800, ean: 0765809248007,

4.3 out of 5 stars with 54 reviews
Wix Air Filter Monitor Kits include grommet, mechanical restriction gauge and instruction card. They are designed to measure the quality of outlet air coming from the air filters and prevent contamination from airborne vapors and dirt. These kits are constructed from temperature resistant materials and are directly connected to the outlet of air filter housing.Includes grommet, mechanical restriction gauge and instruction card. Engineered with a sintered bronze filter inside the brass fitting. C


K&N 62-1020 Vent Filters
By K&N
In Stock
$19.14

mpn: 62-1020, ean: 0024844015006,

4.6 out of 5 stars with 30 reviews
K&N Steel Base Crankcase Vent Filters have a one piece design with a rubber or chrome top and a vent tube added to the base. Filters can be pressed into rubber grommets in valve covers for direct mounting. All base plates are chrome plated. Tubes are made of zinc.Zinc tube base. Baseplates are chrome plated. Mounted directly into rubber grommets in valve covers. Washable and reusable.


K&N 85-2444 Filter Minder; Screw in
By K&N
In Stock
$36.99

mpn: 85-2444, ean: 0024844105370,

4.1 out of 5 stars with 58 reviews
The Filter Minder is an air filter service indicator that monitors air filter restriction and indicates when the air filter should be serviced. As the air filter gets dirty, the yellow position indicator moves in the clear window of the service indicator and locks at the highest point. It can be read even after the engine is turned off. The air filter should not be cleaned until the yellow position indicator reaches the red zone.Monitors your K&N filter for air flow. Indicates when the filter sh


K&N 62-1030 Vent Filters
By K&N
In Stock
$22.27
$21.98
You Save: 1%

mpn: 62-1030, ean: 0024844015013,

4.0 out of 5 stars with 8 reviews
K&N Steel Base Crankcase Vent Filters have a one piece design with a rubber or chrome top and a vent tube added to the base. Filters can be pressed into rubber grommets in valve covers for direct mounting. All base plates are chrome plated. Tubes are made of zinc.Zinc tube base. Baseplates are chrome plated. Mounted directly into rubber grommets in valve covers. Washable and reusable.


K&N 85-2445 Filter Minder; Push in
By K&N
In Stock
$38.65
$36.99
You Save: 4%

mpn: 85-2445, ean: 0024844105363,

4.9 out of 5 stars with 54 reviews
The Filter Minder is an air filter service indicator that monitors air filter restriction and indicates when the air filter should be serviced. As the air filter gets dirty, the yellow position indicator moves in the clear window of the service indicator and locks at the highest point. It can be read even after the engine is turned off. The air filter should not be cleaned until the yellow position indicator reaches the red zone.Monitors your K&N filter for air flow. Indicates when the filter sh


K&N 62-1070 Vent Filters
By K&N
In Stock
$25.99

mpn: 62-1070, ean: 0024844015051,

4.1 out of 5 stars with 48 reviews
K&N Steel Base Crankcase Vent Filters have a one piece design with a rubber or chrome top and a vent tube added to the base. Filters can be pressed into rubber grommets in valve covers for direct mounting. All base plates are chrome plated. Tubes are made of zinc.Zinc tube base. Baseplates are chrome plated. Mounted directly into rubber grommets in valve covers. Washable and reusable.


aFe Power Takeda TC-5201B Dodge Dart Engine Cover
By aFe Power
In Stock
$122.55

mpn: TC-5201B, ean: 0802959521083,

4.0 out of 5 stars with 21 reviews
For those of you who have a Takeda Stage-2 intake system for the 2014-2016 Dodge Dart L4-2.0L, Takeda now offers an engine cover to give a stylish under-hood appearance. This cover is constructed of fiberglass material and painted gloss black that replaces the existing engine cover. The Takeda logo is front and center letting everyone know what brand of intake you have. This cover provides a stealthy yet aggressive style without hurting the performance of the intake and utilizes factory grommets


K&N 62-1050 Vent Filters
By K&N
In Stock
$17.78

mpn: 62-1050, ean: 0024844015037,

4.5 out of 5 stars with 35 reviews
K&N Steel Base Crankcase Vent Filters have a one piece design with a rubber or chrome top and a vent tube added to the base. Filters can be pressed into rubber grommets in valve covers for direct mounting. All base plates are chrome plated. Tubes are made of zinc.Zinc tube base. Baseplates are chrome plated. Mounted directly into rubber grommets in valve covers. Washable and reusable.


K&N 62-1060 Vent Filters
By K&N
In Stock
$19.12
$18.79
You Save: 2%

mpn: 62-1060, ean: 0024844015044,

4.4 out of 5 stars with 39 reviews
K&N Steel Base Crankcase Vent Filters have a one piece design with a rubber or chrome top and a vent tube added to the base. Filters can be pressed into rubber grommets in valve covers for direct mounting. All base plates are chrome plated. Tubes are made of zinc.Zinc tube base. Baseplates are chrome plated. Mounted directly into rubber grommets in valve covers. Washable and reusable.


K&N 62-1517 Vent Filters
By K&N
In Stock
$21.96
$21.77

mpn: 62-1517, ean: 0024844015471,

4.0 out of 5 stars with 56 reviews
K&N crankcase vent filters are designed for racing but are trick enough for show cars. Shield and top plate are chrome-plated for beauty and durability. Base plate is zinc plated steel with an attached vent tube that is designed to push into existing rubber breather grommets. Filter has a 3'' outside diameter with a deflector shield.Push-in design for existing breather grommets. Shield and top plate are chrome plated. 3 inch outside diameter by 2-1/2 inches tall. Washable and reusable.


Mr. Gasket 2054 High Performance Push-On Breather - Chrome
By Mr. Gasket
In Stock
$11.42
$10.28
You Save: 10%

mpn: 2054, ean: 0084041020548,

4.8 out of 5 stars with 51 reviews
This chrome high performance push-on breather is internally baffled and uses a high-porosity filter for high performance use. It fits factory and after-market valve covers with 1.22'' diameter hole and has a grommet included which is individually packed.Internally baffled and uses a high-porosity. Ideal for race car vacuum as well as OEM applications. Integral metal baffle/foam element combination. Fits all factory and after market valve covers. Individually packed grommet is included.


Spectre Performance 42859 White High Performance Push-In Breather
By Spectre Performance
In Stock
$12.67
$12.20
You Save: 4%

mpn: 42859, ean: 0089601428598,

4.0 out of 5 stars with 38 reviews
Spectre’s High Performance Push-In Breather was designed for valve covers with a 1-1/4 inch breather hole. This breather element is 2 3/8 inches tall, with an overall height of 3-1/4 inches. Constructed using triple chrome plated steel and our white synthetic fiber filter material, Spectre’s high performance breather is manufactured using high quality materials ensuring it performs as good as it looks. This breather/vent air filter comes complete with a grommet for quick installation.1-1/4 i


K&N 62-1100 Vent Filters
By K&N
In Stock
$24.99
$23.23
You Save: 7%

mpn: 62-1100, ean: 0024844015082,

4.7 out of 5 stars with 32 reviews
K&N Steel Base Crankcase Vent Filters have a one piece design with a rubber or chrome top and a vent tube added to the base. Filters can be pressed into rubber grommets in valve covers for direct mounting. All base plates are chrome plated. Tubes are made of zinc.Zinc tube base. Baseplates are chrome plated. Mounted directly into rubber grommets in valve covers. Washable and reusable.


Trans-Dapt 4871 Chrome Valve Cover Breathers
By Trans-Dapt Performance
In Stock
$8.49

mpn: 4871, ean: 0086923048718,

4.6 out of 5 stars with 50 reviews
Trans-Dapt Performance Products offers filter style chrome valve cover breathers. For use with Trans Dapt's large assortment of chrome valve covers, as well as other valve cover brands. Hooded and non-hooded models available.Trans-Dapt Performance Products 4871 Valve Cover Breather Cap; Push-In; w/Grommet; 2.75 in. Dia.; Chrome;. Chrome. Trans-Dapt Performance. 4871. Warranty: Yes.



Viewing Page 2 of 3

Browse Our Catalog