Carburetors & Parts / Fuel System - Super Savings! Save up to 39%
Super Savings! Up to 39% off on Carburetors & Parts (in Fuel System) at Split Racing . Top brands include Allstar, ProForm, Richlou, Inc, Canton Racing Products, Moroso, Holley, Walker Products, Edelbrock, Spectre Performance, AED, Trans-Dapt Performance, & Derale. Hurry! Limited time offers. Offers valid only while supplies last.
Allstar ALL26044 5-1/8" Mounting Diameter 2.5" Tall Machined Deluxe Model Aluminum Carburetor Hat with Sealing O-Ring
You Save: 21%
mpn: ALL26044, ean: 0848238016598,
4.9 out of 5 stars with 36 reviews
Allstar 5-1/8 inch Mounting Diameter 2.5 inch Tall Machined Deluxe Model Aluminum Carburetor Hat with Sealing O-Ring is a deluxe model with a 5-1/8 inch mounting diameter. The carb hat is 2.5 inches tall and is made from quality machined aluminum and features a sealing o-ring. The aluminum carb hat helps to keep the carburetor safe when the air cleaner is removed. It is backed by a 90-day limited factory warranty and sold individually.Carburetor hat is a deluxe model with a 5-1/8 inch mounting d
Proform 141-328 Chrome Air Cleaner Wing Nut with Small Hi-Tech Red Bowtie Logo for 1/4-20" Thread
You Save: 24%
mpn: 141-328, ean: 0036666301465,
4.4 out of 5 stars with 52 reviews
Small Hi-Tech Chevy Bowtie Air Cleaner Center NutPremium Air Cleaner Nuts. Available with the distinctive GM and Chevrolet Bowtie Trademarks, these chrome plated zinc die-cast air cleaner center nuts are offered in three popular styles, in both large and small sizes. The large size is recommended for 14 and 10 air cleaner kits, and the small for smaller air cleaner kits. They fit both 1/4-20 and 5/16 18 studs.Proform a trusted industry leader. Backed by manufacturer's Warranty. Great Performance
Carburetor Adapter Kit, Holley & AFB 4BBL 2" Open Port with Gaskets & Hardware (Aluminum)
mpn: A40214, ean: 0844974052111,
4.4 out of 5 stars with 53 reviews
Mota Performance carburetor spacers are designed to allow you to increase intake volume on most any manifold, to save you the expense of buying a high rise manifold. Made from high-quality cast aluminum, these adapters provide a smooth transition from carb to intake.High quality Aluminum construction. Natural aluminum finish. Gasket and hardware included. Universal fit. Sold individually.
Canton Racing Products 85-154 Phenolic Carburetor Spacer (For 4150/4160 Holley 4 Hole 1/4")
By Canton Racing Products
You Save: 3%
mpn: 85-154, ean: 0013066001645,
4.7 out of 5 stars with 29 reviews
1/4'' Thick 4-hole spacer for Holley 4150/4160 600+ CFM carbs. Canton Racing Products has been building oil pans and engine related products for racing and high performance applications since 1981.For Holley 4150/4160 600+ CFM carbs. Made In USA. Stops the transfer of heat from the engine to the fuel system. Recommended Accessory: 85-510 - Mounting Stud Kit.
Moroso 64920 Carburetor Linkage Bushing Set
You Save: 39%
mpn: 64920, ean: 0084663649202,
4.4 out of 5 stars with 31 reviews
Moroso steel carburetor linkage bushing set allows the fitting of a 1/4'' fastener to the 1/2'' diameter hole found in the throttle linkage plate. The split bushing design eliminates the sloppiness present when rubber bushings are used.Split bushing design permits simple installation. Gold iridite steel finish. Allows 1/4'' fastener to 1/2'' diameter hole fit. Sold individually. Manufacture 90 days limited warranty from day of purchase.
Holley 20-45 Kickdown Cable Bracket
You Save: 9%
mpn: HOL 20-45, ean: 0090127036129,
4.9 out of 5 stars with 52 reviews
This kickdown cable bracket aids in throttle cable and throttle return spring installation. It is made of gold anodized steel, mounts to the intake manifold, and does not include return springs.Eases throttle cable and throttle return spring installation. Mounts to intake manifold. Made of gold anodized steel. Does not include return springs. Includes necessary hardware.
Walker Products 15253A Carburetor Kit
mpn: 15253A, ean: 0724620000058,
4.8 out of 5 stars with 17 reviews
Walker Products Fuel System Repair Kits are manufactured to meet or exceed OEM specifications. Walker Products manufactures each fuel system repair kit with all components necessary to complete a proper rebuild of your vehicles fuel system. Each kit includes high quality components that meet or exceed OEM specifications. Walker Products is a TS 16949 certified company. Assembled in USA.Carburetor kit (F-1). 100% OEM style components insure proper fit and assist with easy rebuilding of the fuel s
Edelbrock 8089 FITTING
You Save: 9%
mpn: 8089, ean: 0647367197808,
4.3 out of 5 stars with 36 reviews
The Edelbrock Carburetor Inlet Fittings are accessories which are used to install and tune Edelbrock carburetors. These fittings are manufactured from quality materials to suit your carburetor needs. The fitting is made of brass. The size of the fitting is 5/8-20 and 3/8 with male threads. This fitting can be rotated 360 degrees and allows you to aim your fuel inlet towards the front or rear of the carburetor for clearance under a drop base air cleaner.Used to install and tune Edelbrock carburet
Spectre Performance 5776 1" Open Carb Spacer with Tube
You Save: 20%
mpn: 5776, ean: 0089601577609,
4.3 out of 5 stars with 8 reviews
Spectre's Carburetor Spacer was created for Holley, Edelbrock, Carter AFB carburetors. Featuring a 1 inch aluminum open spacer with tube precision die cast aluminum, this spacer was designed to increase power by raising air/fuel velocity. Gaskets and hardware are included ensuring optimum fit and function.For Holley, Edelbrock, Carter AFB carburetors. 1 Inch aluminum open spacer with tube precision die cast aluminum. Increases power by raising air/fuel velocity. Gaskets and hardware included.
Holley 45-223 Electric Choke Conversion Kit
mpn: HOL 45-223, ean: 0090127066553,
4.2 out of 5 stars with 45 reviews
This electric choke conversion kit is used to convert hot-air or manually operated carburetors to a fully automatic operation. It fits carburetors with an internal vacuum source and comes with a limited warranty.Converts manually operated choke into fully automatic operation. For carburetors with an internal vacuum source. Backed by limited warranty. Sold as a kit. Limited Warranty.
Holley 0-80508S Model 4160 750 CFM Square Bore Vacuum Secondary Electric Choke Replacement Carburetor
You Save: 17%
mpn: HOL 0-80508S, ean: 0090127420096,
4.9 out of 5 stars with 36 reviews
This carburetor features a vacuum secondary with a metering plate that has no jets, power valves, or accelerator pumps which makes it easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. It mixes the right amount of gasoline with air so that the engine runs properly. It is calibrated for gasoline and engineered to improve performance.Calibrated for gasoline and engineered to improve performance. Dual feed fuel inlet with vacuum secondary type. Si
Edelbrock 8723 CARBURETOR SPACER
mpn: EDL-8723, ean: 0085347087235,
4.8 out of 5 stars with 58 reviews
Use open spacers where more plenum volume or more carb-to-plenum floor distance is required. 4-hole spacers enhance low-rpm torque and throttle response and dampen reversion effects on the carb. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.SPACER CARB 1/2in. WOOD FIBER LAMINATE FOUR HOLE.
AED 5585 Vacuum Secondary Quick Change Tuning Kit
You Save: 5%
mpn: 5585, ean: 0817744001787,
4.8 out of 5 stars with 46 reviews
AED Performance was founded with one basic premise in mind; manufacturing of high quality components at reasonable prices. We will honestly endeavor to offer the best product, service, and technical support possible. Our background includes over 3 decades of research, design and development of high performance components. We have one of the most high tech research facilities in the country including our computer controlled WET FLOW BENCH which is capable of flowing any throttle bore seperatly or
Trans-Dapt 2584 Phenolic Carburetor Spacer
By Trans-Dapt Performance
You Save: 2%
mpn: 2584, ean: 0086923025849,
4.0 out of 5 stars with 50 reviews
Provides Excellent Insulating Properties. Cooler; Denser Fuel Mixture. Increased Horsepower. Gaskets; Studs; Nuts And Washers Included.Trans-Dapt Performance Products 2584 Plastic Phenolic 4 Barrel Carb Spacer; Ported w/PCV; 1.0 in.; Incl. Gaskets/Studs/Nuts/Washers;. Authorized Dealer - 100% Satisfaction Guaranteed. Trans-Dapt Performance. 2584. Warranty: Yes.
Holley 37-720 Carburetor Renew Kit
You Save: 10%
mpn: 37720, ean: 0090127059647,
4.5 out of 5 stars with 20 reviews
This carburetor renew kit brings marine carburetors back to original specs and like-new condition. It includes all of the necessary gaskets, O-rings, pump diaphragms, needles and seats, power valves, detailed instructions, and hardware for a complete rebuild.For marine carburetors. Contains all parts and gaskets. Detailed instructions and hardware are included for a complete rebuild. Includes O-rings, pump diaphragm, needle and seat, and power valve. Packaging serves as a handy parts tray.
Holley 0-80457sa Aluminum 600 CFM Four-Barrel Street Carburetor
You Save: 10%
mpn: HOL 0-80457SA, ean: 0090127669150,
4.4 out of 5 stars with 12 reviews
600 CFM four barrel aluminum street carbureto.Weight savings of over 5 pounds. Constructed from aluminum. Electric choke for easy warm up. Ford A/T kickdown, does not work with A.O.D. transmissions. Calibrated for excellent street performance.Throttle Bore:1.563 inch.
Walker Products 15593D Carburetor Kit
You Save: 20%
mpn: 15593D, ean: 0724620011641,
4.9 out of 5 stars with 38 reviews
Walker Products Fuel System Repair Kits are manufactured to meet or exceed OEM specifications. Walker Products manufactures each fuel system repair kit with all components necessary to complete a proper rebuild of your vehicles fuel system. Each kit includes high quality components that meet or exceed OEM specifications. Walker Products is a TS 16949 certified company. Assembled in USA.Carburetor kit (F-2). 100% OEM style components insure proper fit and assist with easy rebuilding of the fuel s
Allstar Performance ALL44122 3/4" Aluminum Wheel Spacer
mpn: ALL44122, ean: 0848238023039,
4.5 out of 5 stars with 8 reviews
Allstar Performance 44122 WHEEL SPACER ALUMINUM. 4-1/2'' AND 4-3/4'' BOLT PATTERNS HAVE 1/2'' HOLES.Aluminum. Bolt Pattern: 5 x 4-1/2'', 4-3/4'', 5''. 3/4'' Thick. 3.075'' I.D..
Holley 45-223S Choke Conversion Kit
You Save: 2%
mpn: HOL 45-223S, ean: 0090127422939,
4.6 out of 5 stars with 31 reviews
This choke conversion kit is designed to convert carburetors which are equipped with manually¿operated or automatic/electric operated chokes. It comes with mounting hardware, a shiny finish, and an internal vacuum source.Comes with mounting hardware. Shiny finish. Converts carburetors which are equipped with manually-operated or automatic/electric operated chokes. Includes internal vacuum source.
Derale 17217 Heavy Duty Fan Blade Series 1000 17" Polished Chrome Stainless Steel Flex Fan Standard Rotation
You Save: 6%
mpn: 17217, ean: 0083277172175,
4.4 out of 5 stars with 25 reviews
Rated up to 10,000 rpm, our 17 inch diameter heavy duty standard rotation fan features sturdy polished and chrome plated steel hubs and 6 polished stainless reinforced blades with a large surface area that improve performance and fuel economy.Improves performance and mileage. Heavy duty steel hubs. Durable stainless blades. Rated up to 10,000 RPM.